What Are The Cheapest Fences To Repair and Replace In Arizona?
If you’re looking for the cheapest fences to repair or replace in Arizona, here’s a clear breakdown of your best budget‑friendly options:
Cheapest Fence Types for Repair & Replacement
1. Wire (Barbed/Plain) & Barbed Wire
-
Repair: Among the most affordable—wire fence repairs can run as low as $190 total, with post replacements at only $30–$60 per post Fence Guides.
-
Installation: Barbed wire installation typically costs just $3–$6 per linear foot, making it one of your cheapest material options HomeGuide+1.
2. Chain-Link Fence
-
Repair Costs: Around $315 on average for a repair; post replacements range from $50–$100, and gate replacements from $110–$195 Fence Guides.
-
Installation Costs: $10–$40 per linear foot installed in Phoenix-area; often averages closer to $12–$17 per foot overall HomeGuidealuminumfencesdirect.net.
-
DIY Option: Reddit users report that 100 feet of 6-ft chain link replacement DIY cost under $500, or around $7–$10 per foot Reddit.
-
Widely regarded as significantly cheaper than wood fences Reddit.
3. Wood Fences (Simple Styles)
-
Repair Cost: Basic wood fences cost roughly $5.75 to $22.75 per linear foot for materials, plus $5–$12.50 for labor Fence Guides.
-
Installation: A wooden picket fence costs around $10–$14 per linear foot, while full privacy wood fences range from $17–$22 per linear foot aluminumfencesdirect.net.
-
Repair Examples: A single board may cost between $5–$20, and post replacement from $20–$60 Bravo Fence Company.
Cost Comparison Summary
| Fence Type | Repair Cost | Installation Cost | Pros |
|---|---|---|---|
| Wire / Barbed Wire | ~$190 total | ~$3–$6/ft | Cheapest; basic functionality |
| Chain-Link | ~$315; DIY: ~$7–$10/ft | ~$10–$40/ft installed | Durable, DIY-friendly, affordable |
| Wood (Picket / Privacy) | $5–$22/ft materials + labor | $10–$22/ft installed | Aesthetic, better privacy, moderate cost |
Best Budget Picks for Arizona
-
Top Choice: Chain-link fences offer the best blend of affordability, durability, and ease of installation, especially if you’re comfortable doing it yourself.
-
Ultra‑cheap alternative: Wire or barbed wire is even less costly but better suited for basic boundary marking or keeping livestock contained—less ideal for aesthetics or privacy.
-
Wood picket fencing is a middle-ground option: affordable for small-scale projects and visually appealing but costs climb when needing height or privacy.
One homeowner shared:
“Replaced 100 feet of 6’ chain link… cost less than $500… now at $7‑10 per foot” Reddit
Another noted:
“Chain link fence is half the price of wood where I am” Reddit
Local Breakdown: Labor vs. Total Installed Cost
Based on regional data, the average cost to install a fence (which typically includes both materials and labor) in Phoenix ranges between $16.82 to $21.57 per linear foot towncontractors.com.
Another local benchmark shows chain-link installation (material + labor) ranges from approximately $10.76 to $15.11 per linear foot (for 4-ft high fences) Promatcher Fences. This suggests labor alone might be several dollars per foot of that total.
National Averages (Helpful for Estimating Labor Separately)
-
The Spruce reports average labor costs nationwide at $35 per hour, or roughly $11 per linear foot The Spruce.
-
Inch Calculator gives a broader range: $5 to $15 per linear foot for labor, or approximately $50–$70 per hour per builder Inch Calculator.
-
For aluminum fences, labor is noted around $22–$31 per hour The Spruce.
Phoenix-Specific Labor Estimates
While precise hourly labor rates specific to Phoenix fencing trades aren’t frequently published, we can infer ranges based on cost breakdowns:
-
Total installed cost:
-
$16.82–$21.57 per linear foot towncontractors.com
-
Chain-link: $10.76–$15.11 per foot (installed) Promatcher Fences
-
-
General labor contribution: Typically, labor might be $5–$10 per linear foot, depending on complexity and materials.
-
Hourly labor estimate: Using national benchmarks and Phoenix’s installed prices, a reasonable local labor rate is likely in the range of $50–$70 per hour, aligning with national averages Inch CalculatorThe Spruce+1.
Summary Table
| Metric | Estimated Rate (Phoenix) |
|---|---|
| Total Installed Cost (all-in) | $16.82–$21.57 per linear foot towncontractors.com |
| Chain-Link Installed Cost | $10.76–$15.11 per linear foot Promatcher Fences |
| Labor Portion (estimated) | ~$5–$10 per linear foot |
| Hourly Labor Rate (estimated range) | ~$50–$70 per hour |
What You Can Do Next
-
Request itemized quotes from local fence contractors—ask them to separate material and labor so you can see labor rate explicitly.
-
Compare multiple estimates, as labor and complexity can vary depending on terrain, gate installation, access, and material handling.
-
Consider DIY for basic jobs, like chain-link fence installation, if you’re comfortable and want to bypass labor costs.